Hardware
Software
Battery Manufacturing Terminology
The channel will be protected when the press of the present step is greater than or equal to the set value.
The channel will be protected when the press of the present step is less than or equal to the set value.
The channel will be protected when the capacity of the present step is greater than or equal to the set value.
A formula consisting of numbers, operators, and variables.
Take the value of the expression as the limited value of the voltage.
Take the value of the expression as the limited value of the current.
The Voltage at half capacity.
When the channel is resumed, the voltage of the final data in the previous step.
Terminal voltage of battery in open circuit state.
Rearrange the channels and display them on the software interface.
The unassigned auxiliary channels are assigned to the selected main channel in priority.
The channels of multiple control units are mapped to the same interface.
Terminate the present step and jump to the selected step.
Move the unfinished test to another channel.
Manually start the selected channel.
Make the step run repeatedly between the selected steps.
